SKU: 89718409251

Enerdrive ePOWER B-TEC 200Ah G2 Lithium Battery + DC2DC Combo

Sale price$1214.55 Regular price$1349.50
Save 10%

Pay in installments of $337.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 17 - Jul 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Enerdrive ePOWER B-TEC 200Ah G2 Lithium Battery + DC2DC ComboSmart Phone Monitoring System This Enerdrive 200ah battery ePOWER B TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android or Apple app to your smartphone or tablet device, you can monitor the following information; Battery Capacity Battery Voltage Battery Current (Amps) Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status Individual Cell Voltage Battery Temperature Battery Cycles Battery

Smart Phone Monitoring System

This Enerdrive 200ah battery ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings

Lithium v AGM Capacities;

  • 100Ah Lithium = 160Ah AGM
  • 125Ah Lithium = 200Ah AGM
  • 200Ah Lithium = 320Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The ePOWER B-TEC battery is perfect for camper trailers, 4WDs (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

With over 5 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 1200 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.

 

Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output

DC M6 screw terminals that will allow for large battery cable connection between all sources

A dedicated Maximum Power Point (MPPT) solar regulator

The same battery algorithms as included in our AC mains ePOWER battery charger. GEL, AGM, Flooded, Lithium and the ability to create  a full custom profile

Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W

40A output up to 40+°C with thermo controlled fan cooling

Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage

Temperature sensor included in charger for more accurate battery charging

The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.

During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads.

Multistage Charging Process

The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries.

The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array.

As dictated by battery manufacturers recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages.

Stage 1 Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible.

Stage 2 Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge.

Stage 3 Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply.

Smart Charging Feature

The ePOWER DC2DC+ Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The ePOWER DC2DC+ Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 89718409251

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
H
Verified Purchase
Heather K
Pawtucket, US
★★★★★ 5
Perfect! Easy, convenient, definitely recommend
Size: 100LBS, Size: 100LBS
I am so glad I found this base that I can just fill with water. After screwing on the wheels, I used my garden hose to fill it with water and put my 1.5 inch diameter umbrella in and tightened it. Easy peasy. I love that it rolls and I can move it wherever I want, and also lock two of the wheels if needed. Definitely would recommend this one!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2025
M
Verified Purchase
MARIA
Whiting, US
★★★★★ 5
Sturdy, well built has wheels that makes it easy to move and also lock in place.
Size: 100LBS
Happy with my purchase. Sturdy well built, love that it has wheels makes it easy to move around and wheels lock in place. I choose to fill it with sand and water as it gets really windy where we live this will prevent my umbrella flying to the neighbors house again 😅
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 19, 2025
N
Verified Purchase
NMS Johnson
Pawtucket, US
★★★★★ 1
Must Read before Purchasing!!!! Height is lost if you use this base!!!!
Size: 100LBS
I was so very excited about this for our umbrella - and then I put it together. I called my adult son to come and take a look - I had to be doing something wrong. To our dismay, I was not. The lowest pole in the umbrella system has 4 welded pieces with holes meant to connect to the legs, thus stabilizing the structure. The lowest pole measures (guestimate) 3 feet. When you choose this system, you do not use the original cross-bars, nor the original lowest pole with the 4 welded pieces. Rather, you use a newly provided lowest piece roughly measuring a foot. In doing so, the structure loses a total of almost 2 feet. For average-height individuals, this would not be a problem. For individuals 6' or greater, this is quite a problem. My son is 6'6. My husband is 6'2. I really wanted the portability of the product. However, we will be returning it for the kind that rest on the cross-bars. I wish someone had mentioned this in the reviews I read and saved me the trouble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 7, 2025
S
Verified Purchase
Sock_Bunny
Fort Morgan, US
★★★★★ 5
Makes moving your umbrella around a breeze.
Size: 100LBS
This is best idea in umbrella stands. Decent price. I love that the water intake/release is on the side. Many are on top of the stand. Doesn't leak. Easy to move around and easy to put together with the included tools. I have 2. One for a very heavy 10 x 6' umbrella, and the other for a very light 1/2 round umbrella. Works equally well for both. One tricky part the instructions don't include is that is parts F and J are 'in place' in the base and you need to remove them to re attach them to the cylinder, or what they refer to as the "stand pole". So, if you are looking for parts (and I did this twice), just remember you will find them on the underside of large plastic umbrella base. Both are black, and so not immediately apparent. Love that there are two locking wheels and they include an extra screw. IKEA could learn a few things here.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 6, 2025
K
Verified Purchase
Karl monroe
Draper, US
★★★★★ 5
This product will fit your every need!!!
Size: 100LBS
Very sturdy, Easy assembly, appealing look and easy to move around. very satisfied with this Product!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 18, 2025

recommand products